How To Repair Canon Pixma 3022

The solution is used for printers

Canon MG2100, MG2110, MG2120, MG2130, MG2140, MG2150, MG2160, MG2170, MG2180

Canon MG2200, MG2210, MG2220, MG2230, MG2240, MG2250, MG2260, MG2270, MG2280

Canon MG3100, MG3110, MG3120, MG3130, MG3140, MG3150, MG3160, MG3170, MG3180

Catechism MG3200, MG3210, MG3220, MG3230, MG3240, MG3250, MG3260, MG3270, MG3280

Catechism MG4100, MG4110, MG4120, MG4130, MG4140, MG4150, MG4160, MG4170, MG4180

Catechism MG4200, MG4210, MG4220, MG4230, MG4240, MG4250, MG4260, MG4270, MG4280

Operator Phone call Error (Warning LED Lit In Orange)

Error [Error code]: Warning: The ink absorber becomes almost total.

−     Main (Blackness) - [1702] or [1703]

−     Chief (Color) - [1704] or [1705]

−     Platen (home position) - [1712] or [1713]

−     Platen (away) - [1714] or [1715]

Led brandish: E08

Message on the LCD: The ink absorber is almost total. Select [OK] to continue printing. Contact the service center for replacement.

Service Phone call Error (by Circadian Blinking of Warning and Ability LEDs)

Cycles of LED blinking: vii times

Error [Fault lawmaking]: Ink absorber near full

−     Principal (Black) - [5B02] or [5B03]

−     Main (Color) - [1704] or [5B05]

−     Platen (home position) - [5B12] or [5B13]

−     Platen (away) - [5B14] or [5B15]

Solution

1. Supervene upon the waste material ink absorber kit

ii. Reset the ink absorber counter value

Every time the printer is turned on or every fourth dimension the printer starts press, the pump will suck ink from the ink tank and period it to the print head. This ink suction produces waste ink, which is contained in the waste matter ink cushion. This mechanism e'er happens every time the printer is turned on and every time it starts press.

Until i day, this waste product ink cushion reaches a capacity of 95% then the error message will appear "Alarm: The ink absorber becomes almost total" or called Operator Call Error. This mistake tin still be ignored, by pressing the Stop/Reset button when the error bulletin appears. Until one day, the waste ink absorber reaches a capacity of 100% or more, an error message will appear "Ink absorber nigh full", or called Service Telephone call Mistake. When the "ink cushion almost total" fault occurs, the printer is unusable and needs to be repaired immediately.

i. Reset the ink cushion counter value

In order to be reset, the printer must be in Service Mode. Following is the procedure for inbound Service Mode.

Stride ane - Enter Service Mode

How to enter Service Style on the Catechism MG2100 series, MG2200 series, MG3100 series, MG3200 series

1.   The printer is off.
2.   Press and agree the Stop/Reset button.
3.   Press and hold the ON button.
4.   Release the Stop/Reset button (do not release the ON button)
5.   While holding downwards the ON button, press the Stop/Reset button 5 times * .
6.   Afterward pressing the Stop/Reset push 5 times, release the ON button.
7.   Wait a few moments, if the Plain Newspaper LED turns greenish, it means the printer has entered Service Mode and the printer reset tin be washed. If the Manifestly Paper LED continues to blink, turn off the printer and repeat the above procedure correctly.

Note:

* : To disable scanner error detection and kickoff the printer in service fashion, press the Stop/Reset button half dozen times . In this way, the service way is bachelor without a scanner.

How to enter Service Fashion on the Catechism MG4100 series, MG4200 series

1.   The printer is off.
2.   Press and hold the Cease button.
3.   Press and concord the Power button.
4.   Release the Stop button (exercise not release the Power button)
5.   While holding down the Ability button, press the Stop button 5 times * .
6.   Afterward pressing the Finish push button 5 times, release the Power button.
7.   Wait a few moments, if the Power LED turns blue it means that the printer has entered Service Way and reset the printer tin be done. If the Power LED continues to blink, turn off the printer and repeat the above process correctly.

Notation:

* : To disable scanner mistake detection and start the printer in service mode, press the Stop button 6 times . In this style, the service mode is available without a scanner.

STEP 2 - Reset Printer

• Service Tool v.3000 for Canon MG2100 serial, MG3100 series, MG4100 series.
• Service Tool five.3400 for Catechism MG2200 series, MG3200 series, MG4200 series.

How to reset Canon MG2100 series, MG3100 series, MG4100 series with Service Tool v.3000

Catechism MG2100 serial, MG3100 series, MG4100 series

• Download Service Tool 5.3000
• Extract the file and open TOOL0006V3000. If you are using macOS, please open up the post-obit link How to open Canon Service Tool from macOS X.
• Load newspaper (A4 or Letter).
• Impress EEPROM (ane) data before resetting the printer, see the values ​​of D_BK (Main Black), D_CL (Principal Color), Dp_AW (Platen Away), Dp_HM (Platen Home). From the example EEPROM data below, D_BK=100.0, D_CL=094.3, Dp_AW=009.9, Dp_HM=010.iv. So what must be reset is the value of D_BK and D_CL, while Dp_AW and Dp_HM, tin be reset or not. Side by side we volition reset all Main and Platen waste material ink counters.

EEPROM data earlier reset

• Reset the Main waste ink counter. Ink Absorber Counter - Cushion: Main (2a) - Counter Value(%): 0 (2b) - click Set up (2c) to execute. Expect a few moments, the printer will print the D_BK and D_CL values ​​later resetting to nix.
• Reset the Platen waste ink counter. Ink Cushion Counter - Absorber: Platen (3a) - Counter Value (%): 0 (3b) - click Set (3c) to execute. Wait a few moments, the printer will print the Dp_AW and Dp_HM values ​​later resetting to zero.
• Subsequently the Principal and Platen waste matter ink counters are reset to zero, and then we will bank check the EEPROM data after resetting.
• Impress EEPROM (four) information afterward reset. Compare EEPROM data before and afterward reset. If the values ​​are D_BK=000.0, D_CL=000.0, Dp_AW=000.0, Dp_HM=000.0 information technology ways that the printer has been reset successfully.
• If all goes well, shut the Service Tool then turn off the printer. Look most fifteen seconds, so plow the printer dorsum on. Done.

How to reset Canon MG2200 series, MG3200 series, MG4200 serial with Service Tool 5.3400

Canon MG2200 serial, MG3200 series, MG4200 series

• Download Service Tool 5.3400
• Excerpt the file and open Service Tool v3400. If you are using macOS, please open up the following link How to open Catechism Service Tool from macOS 10.
• Load paper (A4 or Letter).
• Print EEPROM (1) information before resetting the printer, encounter the values ​​of D_BK (Chief Blackness), D_CL (Chief Color), Dp_AW (Platen Away), Dp_HM (Platen Abode). From the example EEPROM information below, D_BK=100.0, D_CL=094.3, Dp_AW=009.9, Dp_HM=010.4. So what must be reset is the value of D_BK and D_CL, while Dp_AW and Dp_HM, tin be reset or not. Adjacent nosotros volition reset all Principal and Platen waste ink counters.

EEPROM information before reset

• Reset the Master waste ink counter. Ink Absorber Counter - Absorber: Master (2a) - Counter Value (%): 0 (2b) - click Ready (2c) to execute. Wait a few moments, the printer will impress the D_BK and D_CL values ​​after resetting to zilch.
• Reset the Platen waste matter ink counter. Ink Cushion Counter - Absorber: Platen (3a) - Counter Value (%): 0 (3b) - click Set up (3c) to execute. Wait a few moments, the printer will print the Dp_AW and Dp_HM values ​​after resetting to zippo.
• After the Main and Platen waste ink counters are reset to zero, and then we volition cheque the EEPROM data later resetting.
• Impress EEPROM (4) data after reset. Compare EEPROM information before and after reset. If the values ​​are D_BK=000.0, D_CL=000.0, Dp_AW=000.0, Dp_HM=000.0 it means that the printer has been reset successfully.
• If all goes well, close the Service Tool then turn off the printer. Wait about 15 seconds, then turn the printer back on. Done.

2. Replacing or cleaning the ink cushion

Before we supersede the ink absorber, please read the following information:

• New ink absorber can be purchased in the market with Office Number

ABSORBER KIT, Principal

PN. QY5-0356-000 for Canon MG2100 series, MG3100 series, MG4100 serial

PN. QY5-0368-000 for Canon MG2200 series, MG3200 series, MG4200 series

PN. QC4-5950-000 for Canon MG2100 series, MG3100 series, MG4100 serial.

PN. QC4-6101-000 for Canon MG2200 series, MG3200 series, MG4200 serial.

• If a new ink absorber is non available in the market, an alternative solution is to clean the ink absorber and reuse it.
• Replacement of the ink absorber post-obit the information from the EEPROM data. If the D_BK and D_CL values ​​accomplish 100.0, it means replace or clean the chief ink absorber just. If the Dp_AW and Dp_HM values ​​achieve 100.0, it means replace or clean the Platen ink absorber only.

EEPROM data

Based on the information from the EEPROM data in a higher place, considering the value of D_BK=100.0, D_CL=094.three, Dp_AW=009.nine, Dp_HM=010.4, what must be replaced or cleaned is the Main ink absorber, while the Platen ink absorber does not need to be replaced or cleaned.

Considering the EEPROM data for each printer is different, in this mail nosotros volition talk over how to supersede the Principal and Platen ink absorbers.

How to supplant the Main ink absorber

Only remove the right side encompass and replace the primary ink absorber.

• Remove the right side cover (four screws)
• Release the two claws and tube, then take out the Ink Cushion Comprehend with the Main Ink Absorbers (Black & Color) fitted in
• Replace or clean the ink absorbers.

• Supersede the black Ink Absorber at the bottom.
• Install the Ink Absorber Encompass with the new ink absorbers in the machine, and lock the claws.
• Connect the tube.
• Attach the right side embrace.

How to replace the Principal and Platen ink cushion

Remove the external housing and cap blade unit, and supplant all the ink absorbers.

The ink absorber is divided into the post-obit 4 portions:

- Main ink absorber (Blackness): Main ink cushion for the blackness ink (D_BK).

- Master ink absorber (Color): Master ink absorber for the color ink (D_CL).

- Platen ink absorber (Habitation): Platen ink cushion on the home position side (on the right when seen from the front) (Dp_HM)

- Platen ink absorber (Abroad): Platen ink cushion on the contrary side of the home position (on the left when seen from the front) (Dp_AW).

After the replacement is complete, reassemble the printer and ensure that this footstep is carried out correctly to prevent other unwanted damage.

Question and Reply

Q: If the Main or Platen ink absorber is replaced and the printer is non reset, will the printer return to normal?
A: Considering resetting the ink cushion counter is not washed, the printer will still exist mistake and cannot exist used, even though the physical main and platen ink absorber has been replaced. Q: If Main or Platen ink cushion is not replaced and the printer is only reset, volition the printer be normal again?
A: Because the ink absorber counter has been reset to zero, the printer volition return to normal and tin be used, but in the almost future, in that location will be a new problem where the waste material ink volition overflow because the ink absorber is full. Waste material ink that spills out of the printer will crusade unwanted issues.

Q: Error code: 002, 005, 006, 007, 009 when using the Service Tool. What should I practise?

Q: Where can I get other Catechism Service Tools?
A: For consummate information regarding Canon Service Tool drove, please open Canon Service Tool Version

Q: I don't know which Service Tool supports my printer, where can I go information about it?
A: For complete data regarding Canon printers and the Service Tools used, please open theCatechism Service Tools and Supported Printers

Waste ink absorber replacement followed by waste material ink counter reset is the best solution to overcome the problem. If you have trouble doing it yourself, nosotros recommend asking Canon Service Eye for help or a printer repair professional.

Source: https://easyfixs.blogspot.com/2019/09/how-to-reset-canon-pixma-mg4200-series.html

Posted by: coriacommandsone.blogspot.com

Share this post