How To Remove Pa Inspection Stickers
-
11-11-2015,04:27 PM #i
Newbie Member
Removal of inspection stickers inside of windshield?
How-do-you-do all,
Want to get-go by saying how much I beloved the site. I recently bought a motorcar in Pennsylvania and collection it back home to Atlanta.
The country of Pennsylvania has inspection stickers required to be placed on the inside of the windshields. After some research I bought a plastic razor blade/scraper combo and am having a very hard fourth dimension getting the sticker off. I soaked the sticker back with a damp towel, but information technology did not aid much. The sticker appears to be a combination of plastic, foil, and a stiff adhesive with a paper backing and much of the paper backing has come off and the plastic blade is not communicable on the remains of the the sticker. Here is a film from google images of the same stickers I take on my car.
Are in that location any products or processes you recommend to safely remove the sticker?? Any help or direction is profoundly appreciated. Thanks.
-
11-11-2015,04:33 PM #2
Super Member
Re: Removal of inspection stickers within of windshield?
I would lay a towel down on the nuance, as not to go any production on the dash.
Since you're working with glass, forget the plastic razors and go with real razor blades. You can get a mounting holder for the razor blade that will make it easy to piece of work with like a scraper.
Gingerly (don't become willy nilly) apply goo be gone to the sticker. Permit it dwell for a few minutes and so start working it with the razor blade. Repeat as necessary.
Call up to go on the towel or plastic on the dash equally to avoid getting the goo exist gone on the nuance to prevent any discoloration.
Windex will piece of work likewise, but Goo Be Gone or goo gone will work better.
-
eleven-eleven-2015,04:34 PM #3
McKee'southward 37 Product Support
Re: Removal of inspection stickers inside of windshield?
I've always had neat success using Stoner Xenit on stubborn stickers. This citrus-based droplets degreaser volition remove but nearly anything. Saturate the stickers with this product and allow it dwell for 10-15 minutes, then scrape off using a metallic razor bract. Exist careful.
Equally a precautionary step I would place a few microfiber towels on the dash to protect from over spray.
Stoner XENIT Natural Citrus Mold Cleaner
-
11-eleven-2015,04:39 PM #four
Newbie Member
Re: Removal of inspection stickers inside of windshield?
Give thanks you for the quick replies. But to be sure, a metallic razor bract is safe to apply on the inside of the windshield?
Just worried nigh scratching the glass with the edge of the bract. The glass curves and is not flat under the sticker.
Thanks again.
-
11-11-2015,04:41 PM #5
McKee'south 37 Product Support
Re: Removal of inspection stickers inside of windshield?
Unless the glass is tinted, then yes a steel razor is perfectly safe if used properly. If you experience more comfortable with a plastic razor blade that'due south fine too, it volition just take longer.
Originally Posted by Honais 
Thank you for the quick replies. Just to be sure, a metal razor blade is rubber to use on the inside of the windshield?
Just worried near scratching the glass with the edge of the bract. The glass curves and is not flat under the sticker.
Thanks again.
Permit us know how it works out.
-
11-eleven-2015,04:45 PM #half-dozen
Newbie Member
Re: Removal of inspection stickers inside of windshield?
-
11-eleven-2015,05:18 PM #seven
Super Fellow member
Re: Removal of inspection stickers inside of windshield?
Ditto Originally Posted past paul_g I would lay a towel down on the dash, as not to become any product on the dash.
Since you're working with glass, forget the plastic razors and go with existent razor blades. Yous can go a mounting holder for the razor blade that will brand information technology easy to piece of work with like a scraper.
Gingerly (don't go willy nilly) apply goo be gone to the sticker. Let information technology dwell for a few minutes then get-go working it with the razor blade. Repeat as necessary.
Recall to keep the towel or plastic on the dash every bit to avert getting the goo be gone on the dash to preclude any discoloration.
Windex will work besides, only Goo Exist Gone or goo gone will work meliorate.
-
xi-eleven-2015,05:21 PM #8
Super Member
Re: Removal of inspection stickers inside of windshield?
Those aren't stickers,there like a combination of paper and foil.good communication on the product. Originally Posted past Nick@Autogeek I've e'er had great success using Stoner Xenit on stubborn stickers. This citrus-based droplets degreaser will remove just about annihilation. Saturate the stickers with this product and let it dwell for 10-fifteen minutes, then scrape off using a metal razor blade. Be careful.
Equally a precautionary pace I would place a few microfiber towels on the dash to protect from over spray.
Stoner XENIT Natural Citrus Mold Cleaner
-
xi-11-2015,05:37 PM #9
Super Member
Re: Removal of inspection stickers within of windshield?
Heat outside window on sticker
Metal razor
Pare slowly
-
xi-xi-2015,06:24 PM #10
Regular Member
Re: Removal of inspection stickers inside of windshield?
I was a New York State car inspector. I allways used a metal razor bract on a long handled holder and 2 swipes of the sticker and your done . I must have removed at least a chiliad of them that fashion and never had an issue. It took maybe 5 seconds to remove and 0 chemicals!
2016 TOYOTA TACOMA TRD OFF Route Bundle
How To Remove Pa Inspection Stickers,
Source: https://www.autogeekonline.net/forum/auto-detailing-101-a/96610-removal-inspection-stickers-inside-windshield.html
Posted by: coriacommandsone.blogspot.com
0 Response to "How To Remove Pa Inspection Stickers"
Post a Comment